Kenwood VR-2080 5.1-Channel AV Surround Receiver DTS Dolby Digital Phono (ORIGINAL BOX)
Bring powerful late-1990s home theater performance to your system with the Kenwood VR-2080. This 5.1-channel receiver delivers 100 watts per channel and supports DTS, Dolby Digital, Dolby Pro Logic, and multiple DSP soundfields. A dedicated phono input, four digital audio inputs, S-Video switching, second-room output, and extensive analog connections make it equally capable with movies, music, and vinyl. Refurbished, tested, and SpenCertified, this substantial Kenwood receiver is ready to perform.
CONDITION
SPENCERTIFIED- Fully certified by Spencer
Refurbished and SPENCERTIFIED
100% tested and functional. Cleaned inside and out; worn parts replaced as needed. Controls, switches, connection ports, and internal boards were cleaned with WD-40 Specialist Electrical Contact Cleaner, safe for electronics. Amplifier boards were inspected, DC offset was checked, and the receiver was tested through its speaker outputs, phono stage, analog inputs, digital inputs, surround channels, video connections, and AM/FM tuner.
Cosmetic Condition: 9/10
Functional Condition: 10/10
📦 Professionally packed and shipped with care.
WHAT'S IN THE BOX?
- Kenwood VR-2080 5.1-Channel AV Surround Receiver DTS Dolby Digital Phono (ORIGINAL BOX)
- FM Antenna
-
Speaker Wire
- Factory Remote (RC-R0907)
- Batteries
Other information about the Kenwood VR-2080
- Tuning range: FM, MW
- Power output: 100 watts per channel into 6Ω (stereo)
- Surround output: 100W (front), 100W (center), 100W (rear)
- Frequency response: 5Hz to 80kHz
- Total harmonic distortion: 0.03%
- Input sensitivity: 2.5mV (MM), 200mV (line)
- Signal to noise ratio: 77dB (MM), 90dB (line)
- Output: 200mV (line), 1V (Pre out)
- Speaker load impedance: 6Ω to 16Ω
DIMENSIONS
- Size: 17.3" W × 6.4" H × 15.4" D
- Weight: 24.7 lbs
INPUTS
- Composite x1 (front)
- FM x1 (back)
- AM x1 (back)
- Phono x1 L/R (back)
- GND x1 (back)
- Tape In x2 L/R (back)
- CD x1 L/R (back)
- Composite x4 (back)
- Coaxial x2 (back)
- Optical x2 (back)
- System Control x2 (back)
- IR x1 (back)
OUTPUTS
- Headphone Jack x1 (front)
- Pre Out
- Surround x1 L/R (back)
- Center x1 (back)
- Subwoofer x1 (back)
- Tape In x2 L/R (back)
- Monitor Out x1 (back)
- Composite x1 (back)
- IR x1 (back)
- Speaker x3 L/R (back)
- Center Speaker x1 (back)
MANUFACTURE
- Made in China
