Technics SU-V85A Stereo Integrated Amplifier Phono (NO REMOTE)
Experience superior sound quality with the Technics SU-V85A Stereo Integrated Amplifier. Equipped with four amplifiers, two voltage-controlled Class A amps, and two current drive amps, this "Class AA" VC-4 Amplifier System has extremely low distortion and a wide dynamic range, allowing you to get the performance you need from your audio system without compromising on sound quality. Please note that this unit does not come with a remote control.
CONDITION
SPENCERTIFIED- Fully certified by Spencer
Refurbished and SPENCERTIFIED
100% tested and functional. Cleaned inside and out; worn parts replaced as needed. Controls and switches were cleaned with WD-40 Specialist Electrical Contact Cleaner, which is safe for electronics. Internal boards, power-supply components, RCA connections, speaker terminals, protection relay, heat sinks, and solder joints were inspected. DC offset and amplifier bias were checked, and both channels were tested under load for clean, balanced output.
Cosmetic Condition: 8/10
Functional Condition: 10/10
What’s in The Box?
- Technics SU-V85A Stereo Integrated Amplifier Phono (NO REMOTE)
- Speaker Wire
Other information about the Technics SU-V85A
- Power output: 100 watts per channel into 8Ω (stereo)
- Frequency response: 20Hz to 20kHz
- Total harmonic distortion: 0.002%
- Damping factor: 60
- Input sensitivity: 0.17mV (MC), 2.5mV (MM), 150mV (line)
- Signal to noise ratio: 70dB (MC), 79dB (MM), 94dB (line)
- Channel separation: 55dB (line)
- Output: 150mV (line)
- Speaker load impedance: 4Ω to 16Ω
INPUTS
- GND x1 (back)
- Phono x1 L/R (back)
- Tuner x1 L/R (back)
- CD x1 L/R (back)
- AUX x2 L/R (back)
- Tape x3 L/R (back)
OUTPUTS
- Headphone x1 (front)
- Speakers x2 L/R (back)
- Tape x3 L/R (back)
DIMENSIONS
- Size: 16.9" W × 6.2" H × 15.4" D
- Weight: 25.7 lbs
MANUFACTURER PLACE
- Made in Japan
