Sony STR-DA4ES 7.1-Channel Audio Video Receiver ES Series (NO REMOTE) (AS IS) (2002)
If you're looking to amplify your sound and don't mind big receivers taking up some space, then you should look into the Sony STR-DA4ES! If you literally look into it, inside the solid chassis you'll find a massive power supply, non-linear heat sink fins to prevent resonance, OP (Optimum Preamplification) processing, and separate DACs for stereo and multi-channel sources. Plus, you're getting 7.1 channels of sound and 110 watts per channel into 8 ohms (20-20,000 Hz) at 0.05% THD. Finally, with Dolby Digital EX, DTS-ES, and Pro Logic II, you get the home theater sound you're searching for. This system currently has some broken speaker terminals but for the right person who wants to give this amazing system the service and care it needs, it can become the perfect receiver!
CONDITION
SPENCERTIFIED- Fully certified by Spencer
Refurbished and SPENCERTIFIED
Every function has been tested. We have cleaned it inside and out and replaced any worn parts. A recap was performed if necessary. All pots, knobs, connectors and boards have been cleaned with CRC cleaner.
Cosmetic Condition: Good.
Functional Condition: Everything works but for some speaker terminals on the back; the surround back speaker terminals are broken / difficult to use.
WHAT'S IN THE BOX?
- Sony STR-DA4ES 7.1-Channel Audio Video Receiver (NO REMOTE) (AS IS)
- Power Cord
- Audio/Video Cable
Other information about the Sony STRDA4ES
- 110 watts x 7 into 8 ohms (20-20,000 Hz) at 0.05% THD
- Dual 32-bit processors for surround decoding (Dolby Digital EX, DTS-ES, Pro Logic II, DTS 96/24), DTS Neo:6 and Digital Cinema Sound modes
- Dual-room/dual-source A/V capability
- 7.1-channel preamp output
- 5.1 and 7.1-channel inputs
- Component video switching: 2 in, 1 out (50MHz bandwidth)
- Stereo and multichannel analog direct modes
- Digital and video power management
- Control A1II & S
- On-screen display (requires TV with direct video input)
- OP (Optimum Pre-amplification) Processing ensures a high signal-to-noise ratio at all volume levels
- Wide-range frequency response
- Frame-and-beam chassis
- Sf (S-fin) heat sinks
- Oversized power supply and transformers
- Aluminum front panel
DIMENSIONS
- 17" x 17.4" x 6.75" (Length x Width x Height)
- Weight: 46.5 lbs
INPUTS
- Composite AV x5 (front and back)
- S-Video x5 (front and back)
- FM Antenna x1 (back)
- AM Antenna x1 (back)
- Optical x 4 (back)
- Coaxial x2 (back)
- IR Remote x1 (back)
- RS232C x1 (back)
- Component x2 (back)
- Phono L/R x1 (back)
- CD/SACD L/R x1 (back)
- MD/DAT L/R x1 (back)
- Tape L/R x1 (back)
- Multi-Channel In 2 (back)
- Multi-Channel In 1 (back)
- Control S In x2 (back)
- CTRL A1 II x1 (back)
- AC In x1 (back)
OUTPUTS
- Headphone Jack x1 (front)
- Optical x1 (back)
- IR Remote x2 (back)
- Trigger Out x2 (back)
- Component Monitor Out x1 (back)
- MD/DAT L/R x1 (back)
- Tape L/R x1 (back)
- Pre Out (back)
- Control S Out x2 (back)
- S-Video x3 (back)
- Video Monitor Out x1 (back)
- Composite AV x3 (back)
- Front Speakers L/R (Banana Plugs) x2 (back)
- Surround Speakers L/R (Banana Plugs) x2 (back)
- Center Speaker (Banana Plugs) x1 (back)
- AC Outlets x2 (back)
MANUFACTURE DATE and PLACE
- MFD. 2002
- Made in Malaysia
