James Loudspeaker M1000 Mono 1000W Subwoofer Amplifier
The James M1000 is a 2U, reliable mono subwoofer amp that can produce over 1000 watts of RMS power into both 4 ohms and 70 volt loads. It features a front-panel USB connector for firmware updates and a class D design that ensures powerful dynamics and tight bass response. Not for the faint of heart, the M1000 will provide enough power to your speakers to bring down the house!
CONDITION
SPENCERTIFIED- Fully certified by Spencer
Refurbished and SPENCERTIFIED
Every function has been confirmed 100% working. We have cleaned it inside and out and replaced any worn parts. A recap was performed if necessary. All pots, knobs, connectors and boards have been cleaned with CRC cleaner.
Cosmetic Condition: Very Good.
Functional Condition: Works Like New .
WHAT'S IN THE BOX?
- James Loudspeaker M1000 Mono 1000W Subwoofer Amplifier
- Power Cord
Other information about the James Loudspeaker M1000
- Number of Channels: 1
- Built-in DSP: Yes
- Nominal Power Output: 1000 WRMS <1% THD (4 ohms/70V)
- Typical Power Output: 1080 WRMS <1% THD (4 ohms/70V)
- THD at Full Power: 0.07%
- THD at 1W: 0.08%
- Frequency Response: 10-2kHz
- Frequency Response (LFE): 10-160Hz
- S/N Ratio: 100dB Sub/ 91dB LFE
- Output Noise: 1.5mV Sub/ 2mV LFE
- Input Sensitivity (RCA): 220 mV
- Input Sensitivity (XLR): 220 mV
- Input Sensitivity (High Level): 2.6 V
- Line Output: 200mV (Approx. 0 dB Gain)
- Auto Off Time: Adjustable 5 - 30 Mins 5 Mins Steps
- Auto-on Sensitivity: 3.2 mV
- AC Power Req: 115V/230V switchable
- Rack Spaces: 2U
DIMENSIONS
- 19" x 14.25" x 3.5" (Length x Width x Height)
- Weight: 26.5 lbs
INPUTS
- High Level Input L/R x1 (back)
- L (Balanced) Input x1 (back)
- Input L/R x1 (back)
- Input (Unbalanced) L/R x1 (back)
- R (Balanced) Input x1 (back)
- IR Port x1 (back)
- AC Input x1 (back)
OUTPUTS
- Trigger x1 (back)
- Speaker Out +/- x1 (back)
MANUFACTURER
- Made in USA