Tektronix 2236 100 MHz Oscilloscope Analog Multi-Mode Storage Mainframe (AS IS)
The Tektronix 2236 is a 100 MHz portable oscilloscope. An oscilloscope is basically a testing instrument that graphically displays the volage wave form of one or more signals. It features a dual time base and a built-in DMM / counter with a dedicated 9-digit VF display. Plus, in addition to signal frequency and period, the counter can measure delay time and delta time from the delayed timebase. Please note that this item is being sold untested, as-is, because we do not have the proper testing equipment.
CONDITION
At Spencertified, we are experts on a wide variety of electronics. Unfortunately, we do not have the time or resources necessary to fix everything that comes in our shop. So, rather than throwing it away, we give our customers an opportunity to tinker.
We have cleaned it inside and out and replaced any worn parts.
Cosmetic Condition: Very Good.
Functional Condition: Can't properly test because we do not have the proper equipment.
WHAT'S IN THE BOX?
- Tektronix 2236 100 MHz Oscilloscope Analog Multi-Mode Storage Mainframe (AS IS)
Other information about the Tektronix 2236
- Bandwidth: 90 MHz at 2 mV/Div, 100 MHz at 5 mV/Div and above; switchable 20 MHz limit
- Rise time: 3.9 ns at 2 mV/Div, 3.5 ns at 5 mV/Div and above
- Deflection: 2 mV/Div to 5 V/Div, 1−2−5, ±2%, and variable 2.5:1
- Time base: 50 ns/Div to 500 ms/Div (B timebase to 50 ms/Div), 1−2−5, ×10 magnifier for fastest deflection of 5 ns/Div
- Frequency counter: 7 digit resolution; frequency 100 Hz to 100 MHz in decade ranges, period 100 μs to 1 s in decade ranges, plus 5 s range; time base accuracy 1×10-5 (Opt.14: 5×10-7), sensitivity same as trigger specs
- Multimeter: 3¾ digit resolution, ≥2.5 measurements per second, 10 MΩ input resistance, input isolated from scope ground; DC volts 0.5 V to 500 V in decade ranges; AC volts RMS 0.5 V to 350 V in decade ranges; resistance 50 Ω to 50 MΩ in decade ranges, plus 200 MΩ and 2 GΩ ranges; temperature -62 °C to +230 °C (with P6602 probe)
- Input impedance: 1 MΩ // 20 pF
- Trigger sensitivity: 0.3 Div or 35 mV up to 10 MHz, 1 Div or 120 mV up to 60 MHz, 1.5 Div or 200 mV up to 100 MHz
CRT: 80×100 mm² display area, P31 phosphor, 14 kV acceleration voltage - DMM and counter
- Delayed timebase
- X−Y mode
- Z input
DIMENSIONS
- 13.75 x 19.5 x 5.3 (Length x Width x Height)
- Weight: 11.5 lbs
