Technics SA-EX110 AM/FM Stereo Receiver Phono
Power your vintage stereo system with the Technics SA-EX110, a high-output 2-channel receiver with classic late-1990s Technics performance. Its Class H+ amplifier delivers 100 watts per channel, while the built-in phono input makes it ready for a turntable without needing an external preamp. With AM/FM tuning, multiple audio inputs, VCR video switching, and speaker A/B capability, it is a versatile choice for records, CDs, cassette decks, and vintage video sources. SPENCERTIFIED and ready to perform.
CONDITION-
Refurbished - Spencertified
SPENCERTIFIED - Fully certified by Spencer
100% tested and functional. Cleaned inside and out; worn parts replaced as needed. Controls, switches, and boards cleaned with WD-40 Specialist Electrical Contact Cleaner, safe for electronics. Amplifier boards were inspected, controls cleaned, and DC offset checked. FM/AM tuner operation, phono input, CD input, tape monitor loop, VCR audio/video switching, speaker A/B outputs, and headphone jack were tested during final inspection.
Cosmetic conditions: 9/10
Functional Condition: 10/10
INCLUDES-
- Technics SA-EX110 AM/FM Stereo Receiver Phono
- Factory Remote (EUR644346)
- Batteries
- Power Cord
- Analog Audio cables
FEATURES-
- Tuning range: FM, MW
- Power output: 100 watts per channel into 8Ω (stereo)
- Frequency response: 10Hz to 40kHz
- Total harmonic distortion: 0.8%
- Damping factor: 30
- Input sensitivity: 3mV (MM), 200mV (line)
- Signal to noise ratio: 78dB (MM), 83dB (line)
DIMENSIONS-
- Size: 16.8" x 10.75" x 5.75" (W x D x H)
- Weight: 13.41 lbs
INPUTS
- GND x1 (back)
- Phono L/R x1 (back)
- CD L/R x1 (back)
- Tape L/R x1 (back)
- VCR L/R x1 (back)
- Loop Ant x2 (back)
OUTPUTS
- Headphones x1 (front)
- Tape L/R x1 (back)
- VCR L/R x1 (back)
- Speakers L/R x2 (back)
MANUFACTURER
- Made in Malaysia
