Bob Carver's Sunfire Cinema Seven Architect's Choice Power Amplifier (Signature Edition!)
Bob Carver's Sunfire products are all top-of-the-line. And one of the kings of that line is the Sunfire Cinema Seven. This is the Signature version, which is a big step up in power and sound quality compared to the standard (non-signature) edition. Not only does it have a unique, genuine signature from Bob Carver on the faceplate, it also produces 400 watts RMS per channel into 8 ohms, and 800 watts RMS into 4 ohms. It also features a tracking downconverter, which uses 18 Herculean Mosfets, allowing the Cinema Seven to produce phenomenal power output - without generating the heat that normally comes from that kind of power.
Another feature that makes this 7-channel amp unique is the two different kinds of outputs on the front left and front right channels: a standard voltage-source output for typical applications and a higher-impedance current source output. And whichever way you hook it up, you'll receive a multi-layered, deep, three-dimensional soundstage that's so believable, you won't believe it. Plus, who could say no to the ruggedly handsome anodized steel chassis and aluminum faceplate?
And if you want to step up your audio game even further, consider pairing it with the Sunfire Theater Grand Processor III! You can purchase that separately here.
CONDITION
SPENCERTIFIED- Fully certified by Spencer
Refurbished and SPENCERTIFIED
Every function has been confirmed 100% working. We have cleaned it inside and out and replaced any worn parts. A recap was performed if necessary. All pots, knobs, connectors and boards have been cleaned with CRC cleaner.
Cosmetic Condition: Very Good.
Functional Condition: Works Like New.
WHAT'S IN THE BOX?
- Bob Carver's Sunfire Cinema Seven Architect's Choice Power Amplifier Signature Edition! (SUNFIRE THEATER GRAND PROCESSOR III NOT INCLUDED)
- Factory Remote (Sunfire Remote III)
- Batteries
- Power Cord
Other information about the Sunfire Cinema Seven
- Load invariant high fidelity seven channel power amplifier
- Illuminated meter indicates the total energy available
- Crystal base to ensure proper airflow
- Finish: brushed aluminum with black anodizing
- Pre-programmed and learning LCD remote control
- Power output: 400 watts continuous, per channel, into 8 ohms, from 20Hz to 20kHz with no more than 0.5% THD
- Power at clipping, min.: 800 watts per channel into 4 ohms; 1600 watts per channel into 2 ohms
- Hum and noise: -118dB, A-Weighted
- Maximum output current: 120 amps peak to peak per channel
- Maximum output voltage: 57 VRMs
DIMENSIONS
-
17″ x 16.5″ x 5.75″ (Length x Width x Height)
- Weight: 40 lbs
INPUTS
- Trigger Inputs +/- x2 (back)
- Unbalanced RCA Inputs L/R x7 (back)
- Balanced XLR Inputs x7 (back)
- AC Inlet x1 (back)
OUTPUTS
- Right Front Current Source Outputs +/- x1 (back)
- Right Front Voltage Source Outputs +/- x1 (back)
- Center Voltage Source Outputs +/- x1 (back)
- Left Front Current Source Outputs +/- x1 (back)
- Left Front Voltage Source Outputs +/- x1 (back)
- Right Back Voltage Source Outputs +/- x1 (back)
- Right Surround Voltage Source Outputs +/- x1 (back)
- Left Surround Voltage Source Outputs +/- x1 (back)
- Left Back Voltage Source Outputs +/- x1 (back)
MANUFACTURE DATE and PLACE
- MFD. 2003
- Made in USA
