Bob Carver's Sunfire Theater Grand Processor II 5.1 Channel Surround Sound Processor
Bob Carver's Sunfire products are all top-of-the-line. And the Sunfire Theater Grand Processor II is unlike any other product of its class. It's a very well thought-out solid state processor that's heaped with goodies. It features Holographic Imaging for a greatly enhanced soundstage, an FM/AM tuner with 40 station presets, and a 5.1channel direct input. And the sound is incredible and warm, rivaling even the qualities of tube electronics. Plus, the ruggedly handsome anodized steel chassis and aluminum faceplate is nothing short of eye candy.
Bottom line? If you want to run all of your audio and video components from a single, easy-to-use gorgeous control center so you can experience the extraordinary, dynamic, full-range, multidimensional wall-to-wall theater sound that you deserve...then you need the Sunfire Theater Grand Processor II.
CONDITION
SPENCERTIFIED- Fully certified by Spencer
Refurbished and SPENCERTIFIED
Every function has been confirmed 100% working. We have cleaned it inside and out and replaced any worn parts. A recap was performed if necessary. All pots, knobs, connectors and boards have been cleaned with CRC cleaner.
Cosmetic Condition: Very Good.
Functional Condition: Works Like New.
WHAT'S IN THE BOX?
- Bob Carver's Sunfire Theater Grand Processor II Surround Sound Processor
- Factory Remote (Sunfire Theater Grand II)
- Batteries
- Power Cord
Other information about the Sunfire TGPII
- Automatic 5.1 channel DSP mode selection
- Sensitivity (for 0.5 V output): 125 mV
- Sensitivity (for Phono): 1.6 mV
- Frequency response: 20 Hz – 20 kHz +/- 0.5dB
- Signal to Noise (relative to 2V out): 88dB
- Distortion (THD): < 0.03%
- Separation (at 1 kHz): 70 dB
- Tone Control: (Bass): +/- 10 dB (at 100 Hz)
- Tone Control (Treble): +/- 10 dB (at 10 kHz)
- Fully automatic signal-sensing for audio and video input selection
- Dolby Digital, Dolby Pro Logic, and DTS decoding modes
- On-screen display
- Treble and bass tone controls
- Supports all digital sampling rates to 96kHz
- 24-bit Crystal Semiconductor Analog to Digital converters
- 32-bit control microprocessor and 24-bit Motorola Symphony DSP processor
- Multiple DSP "simulated" surround modes for two channel sources
- Holographic Imaging for main channels
- AM/FM tuner with 40 presets
- Gold plated input and output jacks
- Removeable power cord
- Steel chassis with thick, milled aluminum faceplate
- Pre-programmed and learning LCD remote control
DIMENSIONS
-
19″ x 16″ x 6.5″ (Length x Width x Height)
- Weight: 25 lbs
INPUTS
- AM Antenna x1 (back)
- FM Antenna x1 (back)
- GND x1 (back)
- S-Video x5 (back)
- Composite AV x5 (back)
- Analog Audio L/R x4 (back)
- 6 Ch. Input x1 (back)
- Component Video x2 (back)
- Optical Digital x3 (back)
- Coaxial Digital x6 (back)
- RS-232 x1 (back)
- AC Inlet x1 (back)
OUTPUTS
- S-Video x3 (back)
- Composite AV x3 (back)
- Analog Audio L/R x2 (back)
- Component Video x1 (back)
- Coaxial Digital x1 (back)
- Balanced XLR Audio Outputs x6 (back)
- Main Audio Outputs x8 (back)
- Seven Axis L/R x1 (back)
MANUFACTURER
- Made in USA
