Harman/Kardon 330A Vintage AM/FM Stereo Receiver 20WPC Banana Plug Upgrade (1973)
Experience the warm, detailed sound of an early-1970s Harman/Kardon classic with the 330A vintage stereo receiver. Rated at approximately 20 watts per channel, the 330A features AM/FM reception, a dedicated phono input, tape connectivity, independent tone controls, and separable preamp/power amp sections. This unit has also been upgraded with modern banana-plug speaker terminals, new dial lights, and several replacement capacitors. Fully tested, refurbished, and SPENCERTIFIED for reliable everyday listening.
CONDITION
SPENCERTIFIED – Fully certified by Spencer.
Refurbished and SPENCERTIFIED.
100% tested and functional. Controls and switches cleaned with WD-40 Specialist Electrical Contact Cleaner, internal boards and connections inspected, and receiver functions checked for proper operation.
Restoration / Upgrade Work:
-
Speaker terminals upgraded to modern banana plug-compatible binding posts
-
New dial/indicator lights installed
-
Several capacitors replaced
-
Controls and switches cleaned
-
Internal electronics inspected
-
DC offset and amplifier operation checked
Cosmetic Condition: 9/10
Functional Condition: 10/10
WHAT'S IN THE BOX?
-
Harman/Kardon 330A AM/FM Stereo Receiver
FEATURES
-
Classic early-1970s Harman/Kardon stereo receiver
-
Approximately 20 watts per channel into 8 ohms
-
AM and FM stereo tuner
-
Built-in magnetic phono preamp for turntables
-
Tape/Aux input
-
Tape Monitor input
-
Tape recording outputs
-
Separate Preamp Out and Main Amp In connections
-
Upgraded banana plug-compatible speaker terminals
-
Connections for two speaker systems
-
Independent Speaker 1 and Speaker 2 switching
-
Stereo/Mono selector
-
Source/Monitor selector
-
Contour circuit for fuller bass response at lower listening levels
-
Independent left/right bass controls
-
Independent left/right treble controls
-
Balance and volume controls
-
Analog tuning meter
-
FM stereo indicator
-
Front-panel stereo headphone output
-
Switched rear AC convenience outlet
-
Silver and black vintage faceplate styling
SPECIFICATIONS
-
Type: Solid-State AM/FM Stereo Receiver
-
Year: Circa 1973
-
Power Output: Approx. 20 watts per channel into 8 ohms
-
Frequency Response: 20 Hz – 20 kHz
-
Total Harmonic Distortion: Approx. 0.5%
-
Damping Factor: 30
-
Phono Input Sensitivity: 3.3 mV
-
Line Input Sensitivity: 200 mV
-
Supported Speaker Impedance: 4, 8, or 16 ohms
-
Inputs: Phono, Tape/Aux, Tape Monitor
-
Outputs: Tape Out, Preamp Out, Main Amp In, headphone output, dual speaker systems
-
Power Requirements: 117V AC, 60 Hz
-
Dimensions: Approx. 15.2" W × 13" D × 4.5" H
-
Weight: Approx. 20.8 lbs
-
Made in Japan
The original Harman/Kardon manual confirms the 330A's phono, tape/aux, tape-monitor, preamp/main-amp connections, two speaker systems, 4/8/16-ohm compatibility, and Japanese manufacture. Published specifications list roughly 20 watts per channel, 387 × 330 × 114 mm dimensions, and 9.45 kg weight.