Integra DTR-30.5 7.2-Channel Wireless AV Receiver with HDMI (NO REMOTE)
For home theater receiver the whole family will love, you need the Integra DTR-30.5. It's a 7.2-channel, 95 watts per channel, AV receiver. It is rated down to 6 ohms, features discrete outputs stages for all channels, and a push-pull amplifier design. But it's also wi-fi compatible and Bluetooth supported - perfect for anyone in the household to listen to music with their smartphone. Yet it even has a phono hookup for your old-school turntable! It doesn't get much better than this.
CONDITION
SPENCERTIFIED- Fully certified by Spencer
Refurbished and SPENCERTIFIED
Every function has been confirmed 100% working. We have cleaned it inside and out and replaced any worn parts. A recap was performed if necessary. All pots, knobs, connectors and boards have been cleaned with CRC cleaner.
Cosmetic Condition: Very Good.
Functional Condition: Very Good.
WHAT'S IN THE BOX?
- Integra DTR-30.5 7.2-Channel Wireless AV Receiver with HDMI (NO REMOTE)
- Power Cord
- HDMI Cable
Other information about the Integra DTR 30.5
- Power: at 8 ohms, 20-20kHZ 0.08%, 95 Watts
- Amplifier Frequency Response (WRAT): 5Hz - 100kHz
- THX Certified
- Discrete Output Stages for All Channels
- PUSH-PULL Amplifier Design
- 3-Stage Inverted Darlington Circuitry
- Independent Block Construction (Amp/Preprocessor)
- Shielded Toroidal Transformer
- Independent Power Supply 2
- High Quality Extruded Aluminum Heatsink
- Bi-amp Capability For Front
- Dolby TrueHD, Dolby Digital Plus Decoding
- DTS-HD Master Audio, DTS-HD Express Decoding
- DTS Neo:X (Front High / Wide Channels)
- Dolby Pro Logic IIz (Front High Channels)
- Dolby Volume
- THX Processing Modes & Loudness Plus
- THX Media Director Pass-through
- Digital Processing Crossover Network
- Differential DAC Mode for Front Channels
- Audyssey Dynamic EQ & Dynamic Volume
- GAME Surround Modes (Rock, Action, Sports, Role Play)
- Advanced Music Optimizer to Enhance
- Compressed Audio Files
- DSD Processing / Direct Mode
- 192K / 24-Bit Audio DAC
- 192K / 32-Bit Audio DAC
- Vector Linear Shaping Circuitry (VLSC)
- 32-Bit DSP Chip for Advanced Processing
- Ultra-Low-Jitter Circuitry to Improve Audio
- Manual Speaker EQ
- ISF Certified Calibration Controls (ISFccc)
- Picture Control Settings per Source
- Pandora, Rhapsody, SiriusXM iRadio, TuneIn, Spotify, Slacker
- USB Input for Streaming Audio Front
- Wireless Network Ready
- Wi-Fi-Certified
- Bluetooth Ready
- Built-in Firmware Updates via Network / USB
- Firmware Update Notification
- HDMI Standby "Through" Mode Assignable
- Setup Store & Recall Function
- Screensaver Function
- Hybrid Standby to Reduce Power Consumption
DIMENSIONS
- 17.13" x 11.38" x 6.2" (Length x Width x Height)
- Weight: 28.7 lbs
INPUTS
- USB x1 (front)
- Setup Mic x1 (front)
- Composite AV x5 (front and back)
- HDMI Input x6 (back)
- RI Remote Control x1 (back)
- Optical x1 (back)
- Coaxial x2 (back)
- Ethernet x1 (back)
- AM Antenna x1 (back)
-
FM Antenna x1 (back)
- Component x2 (back)
- Phono L/R x1 (back)
- GND x1 (back)
- IR In x2 (back)
- RS232 x1 (back)
- AC Inlet x1 (back)
OUTPUTS
- Headphones Jack x1 (front)
- HDMI Output x2 (back)
- Component x1 (back)
- Video Monitor Out x1 (back)
- Speaker Pre Outs (back)
- Zone 2 L/R x1 (back)
- IR Out x1 (back)
- 12V Trigger Out x3 (back)
- Speaker Pre Outs (back)
- Surround Back or Front High Speaker (BP) L/R x1 (back)
- Surround Speakers (BP) L/R x1 (back)
- Front Speakers (BP) L/R x1 (back)
- Center Speaker (BP) x1 (back)
MANUFACTURER
- Made in Malaysia