Pioneer VSX-4000 Audio Video Receiver Phono Dolby Surround
Step into classic home theater sound with the Pioneer VSX-4000 audio video receiver. Designed for early surround sound systems, this unit delivers rich stereo audio along with Dolby Surround processing for an expanded listening experience. With a full range of analog audio and video inputs, it pairs easily with vintage and retro media sources. A solid choice for anyone building a classic AV setup. Fully tested and ready to perform.
CONDITION
SPENCERTIFIED- Fully certified by Spencer
100% tested. Cleaned inside and out; worn parts replaced as needed. Controls, switches, and boards cleaned with WD-40 Specialist Electrical Contact Cleaner (safe for electronics). All audio and video inputs/outputs tested. Speaker terminals cleaned. Internal components inspected and dust removed. Tuner tested for clear AM/FM reception. DC offset checked.
Cosmetic Condition: 9/10
Functional Condition: 10/10
📦 Professionally packed and shipped with care.
WHAT'S IN THE BOX?
- Pioneer VSX-4000 Audio Video Receiver Phono Dolby Surround
- Factory Remote (CU-VSX001)
- Batteries
- Composite Cable
Other information about the Pioneer VSX-4000
- Tuning range: FM, MW
- Power output: 60 watts per channel into 8Ω (stereo)
- Frequency response: 5Hz to 100kHz
- Total harmonic distortion: 0.007%
- Damping factor: 45
- Input sensitivity: 2.5mV (MM), 150mV (line)
- Signal to noise ratio: 73dB (MM), 98dB (line)
- Channel separation: 65dB (MM), 65dB (line)
- Output: 150mV (line)
- Speaker load impedance: 4Ω to 16Ω
DIMENSIONS
- Size: 16" x 4" x 14" (W x H x D)
-
Weight: 18 lbs
INPUTS
- Control x1 (back)
- Phono L/R x1 (back)
- CD x1 L/R (back)
- Tape L/R x2 (back)
- Composite x3 (back)
OUTPUTS
- Headphones Jack x1 (front)
- Control x1 (back)
- Tape L/R x2 (back)
- Composite x2 (back)
- Video x1 (back)
- RF Modulator x1 (back)
- Speakers L/R x2 (back)
MANUFACTURE
- Made in Japan
