Sansui 7070 Vintage Stereo Receiver Made in Japan
This classic stereo receiver is from Sansui's golden era of audio. The 7070 puts out a respectable 60 watts per channel and even features two AC outlets, a highly sensitive MOS FET FM front-end, and a Dolby FM adaptor terminal. So this system will absolutely both look and sound great as part of any home theater setup!
CONDITION
SPENCERTIFIED- Fully certified by Spencer
Refurbished and SPENCERTIFIED
Every function has been confirmed 100% working. We have cleaned it inside and out and replaced any worn parts. A recap was performed if necessary. All pots, knobs, connectors and boards have been cleaned with CRC cleaner.
Cosmetic Condition: Top of the unit has a tacky and poor refinish. You may want to wrap it with vinyl or veneer it.
Functional Condition: Works Like New .
WHAT'S IN THE BOX?
- Sansui 7070 Vintage Stereo Receiver Made in Japan
- Audio Cables
Other information about the Sansui 7070
- Tuning range: FM, MW
- Power output: 60 watts per channel into 8Ω (stereo)
- Frequency response: 20Hz to 30kHz
- Total harmonic distortion: 0.3%
- Damping factor: 45
- Input sensitivity: 2.5mV (mic), 2.5mV (MM), 150mV (line)
- Signal to noise ratio: 70dB (MM), 80dB (line)
- Channel separation: 50dB (MM), 50dB (line)
- Output: 150mV (line), 30mV (DIN)
- Speaker load impedance: 4Ω to 8Ω
DIMENSIONS
- 19.8" x 14.6" x 6.15" (Length x Width x Height)
- Weight: 37 lbs
INPUTS
- Microphone x1 (front)
- FM Antenna x1 (back)
- AM Antenna x1 (back)
- GND x1 (back)
- Phono L/R x2 (back)
- Tape L/R x2 (back)
- Dolby NR/4-Ch Adaptor x1 (back)
OUTPUTS
- Headphones Jack x1 (front)
- Tape L/R x2 (back)
- Dolby NR/4-Ch Adaptor x1 (back)
- Speaker A R/L x1 (back)
- Speaker B R/L x1 (back)
- AC Outlets x2 (back)
MANUFACTURE DATE and PLACE
- MFD. 1976-1979
- Made in Japan
