Yamaha CR-2020 Vintage Natural Sound Stereo Receiver (NO AUDIO)
The CR-2020 is one of Yamaha's most powerful and ultra low distortion home audio systems. This vintage component offers two headphones jacks, a Dolby FM adaptor, and turnover frequency. This system currently has no audio, but for the right person who wants to give this amazing system the service and care it needs, it can become the perfect receiver!
CONDITION
Every function has been confirmed 100% what is and what is not working. We have cleaned it inside and out and replaced any worn parts. A recap was performed if necessary. All pots, knobs, connectors and boards have been cleaned with CRC cleaner.
Cosmetic Condition: Good (vent at the top of the unit has scuffing and faint discoloring).
Functional Condition: Powers on, but has no audio. Speaker protection mode triggers.
WHAT'S IN THE BOX?
- Yamaha CR-2020 Vintage Natural Sound Stereo Receiver (NO AUDIO)
Other information about the Yamaha CR-2020
- Tuning range: FM, MW
- Power output: 105 watts per channel into 8Ω (stereo)
- Frequency response: 10Hz to 100kHz
- Total harmonic distortion: 0.05%
- Damping factor: 40
- Input sensitivity: 0.05mV (MC), 2mV (MM), 120mV (DIN), 120mV (line)
- Signal to noise ratio: 95dB (mic), 100dB (MC), 85dB (MM)
- Output: 150mV (line), 30mV (DIN), 0.775V (Pre out)
- Speaker load impedance: 4Ω (minimum)
DIMENSIONS
- 21.26" x 16.4" x 6.58" (Length x Width x Height)
- Weight: 43 lbs
INPUTS
- FM Antenna x1 (back)
- AM Antenna x1 (back)
- GND x1 (back)
- Phono L/R x2 (back)
- Aux L/R x1 (back)
- Tape L/R x2 (back)
- Dolby FM Adaptor L/R x1 (back)
- Main In L/R x1 (back)
OUTPUTS
- Headphones Jack x2 (back)
- Tape L/R x2 (back)
- Dolby FM Adaptor L/R x1 (back)
- Pre Out L/R x1 (back)
- Speakers R/L x3 (back)
- AC Outlets x3 (back)
MANUFACTURE DATE and PLACE
- MFD. 1977-1980
- Made in Japan
